S1-4 Y62 Patrol Rear Bar



Our current turn around is approximately 6-12 weeks.
If your order is urgent, we suggest you contacting us directly prior to placing an order.


What we need to know for your order:

  • Do you require a Nissan wiring harness? ($290) This is only required if you have never had/or don’t have a tow bar fitted.
  • If painting the bar work to match your vehicle, your exact colour code i.e. KAD, BW5, QAC. This can be added to the notes section in the checkout.
  • Series 1-4 changed the amount of sensors as they progressed, so we like to confirm just in case as the sensor holes come pre-drilled!

Please refer to product description below for further information regarding the bar as well as ordering options.


Our Y62 Patrol Rear Bars suit all Y62 Patrol models; Series 1 – Series 5, ST/Ti/Ti-L.
Comes with a 3.5 tonne incorporated tow hitch along with a 4″ drop hitch to suit most vehicles.
Running non-supplied hitch could change your tow rating and/or void our warranty terms.
Ability to chose from different carrier configurations.
The center part of the rear bar is made from 6mm steel, and the wings are made from 3mm steel.
All pre-laser cut to precision.
The Ti-L rear bars come with a custom wing infill to allow for the Blind-spot/Lane departure sensor.
All features technology based on your vehicle will work exactly the same with our products fitted.
The sensors get refitted back into the rear bar and your trailer plugs have a nice provision tucked up underneath the rear bar.
Round 18W reverse lights for aiding with reversing at night, with stylish stop/tail indicators that complete the look of your Raslarr rear bar.
The swing aways have self-adjusting spring loading latches combined with CNC machined joints running a roller bearing to allow for smooth operation.
Swing aways are fitted with gas struts for peace of mind when opening carriers.
If opting for the wheel carriers, these are equipped with adjustable mounting flange to suit different offset wheels.
All rear bars are capable of carrying up to dual 35’s comfortably or 35″ tyre and dual jerry can holders.

Rear Bar: 78kgs
Wheel Carriers: 15kgs
Dual Jerry Can Holders: 17kgs

Camera can be relocated or remain on the door.
Unfortunately the camera relocation kit is only applicable to the S4 and S5, S1-3’s will need to be relocated yourself or by your chosen auto-electrician.
These are made from quality Australian steel with quality workmanship.
All proudly manufactured in Mt Evelyn, Victoria.


We have flat rate shipping fees for Australia-wide shipments. Shipping to a business is preferred, however these can be shipped to residential address. Further information can be found in the checkout.
VIC: $185
NSW: $210
QLD: $300
NT: $290
SA: $185
ACT: $185
WA: $380
TAS: $185


Our products come standard sandblasted, zinc primed and powder coated in a Satin black as standard.
We can colour match the bar work to your vehicle, however we require your exact colour code i.e. KAD, QAC etc.
Painting of rear bar only: $540
Painting of rear bar & carrier(s): $640
>>PEARL<< is an additional $140.


The total time Raslarr takes to fit a Y62 Patrol Rear Bar is 8 hours.
Cost: $1,080.00

Have Questions?