80 Series Azza Bar (New Hoops)

Clear

** THESE PRODUCTS ARE MADE TO ORDER**

Our current turn around is approximately 12-16 weeks.
If your order is urgent, we suggest you contacting us directly prior to placing an order.

 

What we need to know for your order:

  • If painting the bar work to match your vehicle, your exact colour code i.e. KY0, 056. This can be added to the notes section in the checkout.

Please refer to product description below for further information regarding the bar as well as ordering options.

PRODUCT DESCIPTION

Our 80 Series Bull Bars are compatible with all years for the 80 Series Landcruiser.
The bull bars come standard as low mount winch compatibility, however if you’re wanting to run a high mount winch, this will need to be noted down so the bar can be notched to suit. Applies to standard high mount winches. Extended drum winches will not work.
The headlight hoops are made from 50mm OD tube with 3.2mm thickness.
The centre hoops are made from 75mm OD tube with 3.2mm thickness.
With the bash plate and centre pan made from 4mm steel, this will ensure everything is protected when you need it.
2 slotted aerial tabs positioned on the LHS headlight hoop.
20mm laser cut holes to allow for fitment of 20mm eyebolt recovery hooks when required. Just ensure that these are rated hooks that you’re fitting.
If you’re planning to run spotlights, these will sit in front of the centre hoop.
A lightbar will need to be fitted should you decide to run a high mount winch, as this part of the centre pan that is notched meaning you loose a spot to mount your spotties.
These are made from quality Australian steel with quality workmanship.
All proudly manufactured in Mt Evelyn, Victoria.

WEIGHT OF PRODUCT: 55kgs (approximately)

SHIPPING COSTS

We have flat rate shipping fees for Australia-wide shipments. Shipping to a business is preferred, however these can be shipped to residential address. Further information can be found in the checkout.
VIC: $235
NSW: $275
QLD: $435
NT: $430
SA: $280
ACT: $225
WA: $240
TAS: $235

COLOUR CODING

Our products come standard sandblasted, zinc primed and powder coated in a Satin black as standard.
We can colour match the bar work to your vehicle, however we require your exact colour code i.e. KAD, QAC etc.
Painting of bull bar: $600
>>PEARL<< is an additional $140.

FITTING COSTS

The total time Raslarr takes to fit a 80 Series Bull Bar is 3.5 hours.
Cost: $472.50
Wiring of winches is $405.00

Have Questions?